12
5-4. Setting the Timer
Stop Time Setting
The air-conditioner stops operation when the pre-set time is reached.
(The time can be set in steps of ten minutes.)
e.g. To make the operation stop at 6:00 pm.
1. If the LCD displays are not on, press the POWER ON/OFF but-
ton.
2. Press the STOP button (TIMER SET).
™
Check that “
” and “
” are displayed.
™
To cancel, press the STOP button once again.
3. Press the HR. and MIN. buttons.
™
Adjust the displayed time to 6:00 pm.
™
When “
” is not displayed, time setting cannot be carried out.
In this case, press the STOP button again to cause “
” to be
displayed.
When the time is set, the Stop Timer setting is completed.
™
When the Stop Timer is set, the set time will be displayed instead
of the current time.
During the setting of Stop Timer, “
” will be displayed but “
” will
not be displayed.
Start Timer Setting
The air-conditioner stops operation when the pre-set time is reached.
e.g. To cause the operation to start at 9:00 am.
1. If the LCD displays are not on, press the POWER ON/OFF but-
ton.
2. Press the START button (TIMER SET).
™
Check that “
” and “
” are displayed.
™
To cancel, press the START button once again.
3. Press the HR. and MIN. buttons.
™
Adjust the displayed time to 9:00 am.
™
When “
” is not displayed, time setting cannot be done.
In that case, press the START button again to cause “
” to be
displayed.
When the time is set, the Start Timer setting is completed.
™
When the Start Timer is set, the set time will be displayed instead
of the current time.
During the setting of Start Timer “
” will be displayed but “
” will
not be displayed.
Note:
™
The operation mode, pre-set temperature and the fan speed will be displayed during Start Timer
operation, but the air-condition will not start until the pre-set start time is reached.
™
The blowout direction cannot be changed once the Start Timer setting is completed.
ON/OFF
NOT AVAILABLE
˚C
PM
CLOCK
MODE
FAN
VANE
STOP
START
HR.
MIN.
ON/OFF
NOT AVAILABLE
˚C
AM
CLOCK
MODE
FAN
VANE
STOP
START
HR.
MIN.
