background image

© 2018 Mitsubishi Electric US, Inc. 

2

 

Warning

  • Do not use the red 5-pin 

connector to create an unsupported 

equipment combination.

  Unsupported equipment combinations 

may result in fire, electric shock, and/

or damage/water leaks.  Refer to the 

Wireless Interface 2 compatibility 

guide for more details. 

• Users should not install the 

Interface on their own.

Improper installation may result in 

fire, electric shock, or damage/water 

leaks. Consult the dealer from whom 

you purchased the unit or professional 

installer.

 • The Interface should be securely 

installed in accordance with this 

installation manual.

Improper installation may result in fire, 

electric shock, or damage.

 • The unit should be mounted in a 

location that can support its weight.

If the unit is installed in a location that 

cannot support its weight, the Wireless 

Interface 2 could fall and cause 

damage.

 • Install securely in a place where 

the Wireless Interface 2 does not 

interfere with equipment operation 

or serviceability.

  Improper installation may result in fire, 

electric shock, or damage/water leaks.

 • Do not install Wireless Interface 2 

inside a metal enclosure.

  Improper installation may result in 

diminished signal strength. 

 

 

 

 

 

 

 

 

    

 • Connect and fasten the electric 

wires securely so external force 

on the wires will not apply on the 

terminals.

Improper connection and mounting 

may result in breakdown, heat 

generation, smoke generation, or fire.

 • Mitsubishi components or other 

designated components must be 

used for installation.

Improper component may result in fire, 

electric shock, or damage/water leaks.

 • Electrical work must be performed 

by a licensed professional using 

the instructions detailed in the 

installation manual.

Inadequate circuit capacity or 

improper installation may result in 

electric shock or fire. 

 • This appliance is not intended for 

use by persons (including children) 

with reduced physical, sensory 

or mental capabilities, or lack of 

experience and knowledge, unless 

they have been given supervision 

or instruction concerning use of the 

appliance by a person responsible 

for their safety.

 • Children should be supervised to 

ensure that they do not play with 

the appliances.

 • This device complies with part 15 of 

the FCC Rules. Operation is subject 

to the following two conditions:  

(1) This device may not cause 

harmful interference; and  

(2) This device must accept any 

interference received, including 

interference that may cause 

undesired operation.

 

Wireless Interface 2

Содержание PAC-USWHS002-WF-2









Отзывы: