background image

© 2018 Mitsubishi Electric US, Inc. 

4

 

Caution

 • To prevent damage from static 

electricity, touch a nearby metal 

body to discharge static electricity 

from yourself before touching the 

Wireless Interface 2.

Static electricity from the human body 

may damage the Wireless Interface 

2 unit. 

 •  Do not install the Wireless 

Interface 2 in a place with much 

steam, such as bathroom. 

Avoid places where water is splashed 

or where condensation forms on walls. 

Installing in such places can cause 

electric shock or breakdown.

 • Do not install the Wireless Interface 

2 in places with direct sunlight or 

where the ambient temperature is 

40º C, 104º F or more or is 0º C,  

32º F or less. 

Direct sunlight and high or low 

temperature environments may cause 

the Wireless Interface 2 to deform or 

breakdown.

 

• Do not use in special 

environments. 

Use in places with much oil (including 

machine oil), steam, or sulfuric gas 

may lead to severe decrease in 

functionality and damage to parts.

 • Turn off power supply of connected 

equipment when performing 

construction or wiring work.

Failure 

to turn off the power supply to the 

connected equipment may lead to 

malfunction or breakdown of the 

Wireless Interface 2 or connected 

equipment.

 • Dismantling the indoor unit.

Please refer to the indoor units 

“service manual” for detailed 

instructions for accessing the 

control interface connector CN105 
on the indoor unit control PCB.

Notes

  •  The End user should read and 

accept the Terms and conditions 

of the kumo cloud

®

 before 

commencement of the installation of  

PAC-USWHS002-WF-2.

  •  To complete connection of the   

PAC-USWHS002-WF-2 to the  

kumo cloud

®

 physical access to the 

access point may be required. 

 • Visit 

http://kumocloud.com

 for 

additional information about 

controlling the 

PAC-USWHS002-WF-2 from your 

web browser or smart phone.

  •  The PAC-USWHS002-WF-2 should 

not be installed and connected to 

any Mitsubishi Electric system which 

is to provide cooling or heating to 

critical applications.

  •  Details of the air conditioner 

and PAC-USWHS002-WF-2 can 

be recorded on page 6 ‘Setting 

Information’.

  •  Use of the PAC-USWHS002-WF-2 

implies acceptance of our terms and 

conditions located at 

kumocloud.

com/terms.

  •  The antenna used for this transmitter 

must be installed to provide a 

separation distance of at least 

20 cm from all persons and must 

not be co-located or operating in 

conjunction with any other antenna 

or transmitter.

Содержание PAC-USWHS002-WF-2









Отзывы: