background image

© 2018 Mitsubishi Electric US, Inc. 

3

 

Warning

 • This equipment has been tested 

and found to comply with the 

limits for a Class B digital device, 

pursuant to part 15 of the FCC 

Rules. These limits are designed 

to provide reasonable protection 

against harmful interference in 

a residential installation. This 

equipment generates, uses and 

can radiate radio frequency energy 

and, if not installed and used in 

accordance with the instructions, 

may cause harmful interference 

to radio communications. 

However, there is no guarantee 

that interference will not occur 

in a particular installation. If this 

equipment does cause harmful 

interference to radio or television 

reception, which can be determined 

by turning the equipment off and 

on, the user is encouraged to try to 

correct the interference by one or 

more of the following measures:

  •  Reorient or relocate the receiving 

antenna.

  •  Increase the separation between the 

equipment and receiver.

  •  Connect the equipment into an outlet 

on a circuit different from that to 

which the receiver is connected.

  •  Consult the dealer or an experienced 

radio/TV technician for help. 

 

 

Warning

 • This equipment complies with radio 

frequency exposure limits set forth 

by the FCC for an uncontrolled 

environment. This equipment 

should be installed and operated 

with a minimum distance of 20 cm., 

7.8 inch between the device and the 

user or bystanders. 

 • This device must not be co-located 

or operating in conjunction with 

any other antenna or transmitter.

 • Changes or modifications not 

expressly approved by the party 

responsible for compliance could 

void the user’s authority to operate 

the equipment.

 • Do not connect the Wireless 

Interface 2 to earth inside the air 

conditioner.  

 

 

 

 

 

 

Wireless Interface 2

Содержание PAC-USWHS002-WF-2









Отзывы: