8
AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT
COOL/DRY
HEAT
AUT
O
• The vane automatically moves to horizontal position.
It will not swing.
NOTE:
Air blows out upper than position (1).
• To constantly change the air
fl
ow direction, select
(SWING) with the
E
N
A
V
button.
• Immediately after the air conditioner starts operating,
the vane stays at horizontal position. Once the air
from the indoor unit becomes suf
fi
ciently warm, the
vane moves to position (4).
• Once the air conditioner starts operating, the fan
speed increases gradually as the air from the indoor
unit gets warmer, and continues until the set speed is
fi
nally reached.
MANUAL
• After around one hour of operation, the air conditioner
automatically moves the vane to position (1).
To change the air
fl
ow direction to the original setting,
operate the VANE button on the remote controller
again.
• The vane does not move to the straight-down position
in the COOL and DRY mode.
• Immediately after the air conditioner starts operating,
the vane stays at horizontal position. Once the air
from the indoor unit becomes suf
fi
ciently warm, the
vane moves to the position corresponding to the set
direction of air
fl
ow.
• Once the air conditioner starts operating, the fan
speed increases gradually as the air from the indoor
unit gets warmer, and continues until the set speed is
fi
nally reached.
SWING
• The vane moves intermittently between positions (1)
and (4). The vane stops for a brief period at positions
(1) and (4).
• The vane moves intermittently between positions (2)
and (4). The vane stops for a brief period at positions
(2) and (4).
When the air
fl
ow direction is
set to position (2), (3) or (4)
Movement of the horizontal vane
)
1
(
)
4
(
)
2
(
)
4
(
Horizontal position
At the start
of heating
operation
Position (4)
Very small
air
fl
ow
When air
becomes
warm...
Horizontal
position
Position (1)
After
around 0.5
to 1 hour
At the start
of heating
operation
Set Position
Very small
air
fl
ow
When air
becomes
warm...
Horizontal
position
NOTE:
• Adjust the vertical AIR FLOW direction using the remote controller. Moving the horizontal vane manually can cause
trouble.
• When the operation mode changes in “
(AUTO)” mode, the horizontal vane is automatically changed to the
position in each mode.
To change the horizontal direction of the air
fl
ow, move the vertical vane manually.
Adjust the vane before operation starts.
Since the horizontal vane moves automatically, your
fi
ngers may be caught.
To change the air
fl
ow direction not to blow directly onto your body.
To change the air
fl
ow direction
When to use this function?
COOL/DRY
HEAT
Pressing and holding
the
E
N
A
V
button for
2 seconds or more
causes the horizontal
vane to reverse and
move to horizontal
position.
Use this function if you don’t
want the air from the indoor
unit to blow directly onto your
body.
• Depending on the shape of
the room, the air may blow
directly onto your body.
• Press the
E
N
A
V
button again
to return the vane to the
previously-set position.
The air conditioner starts the
cooling or drying operation
approx. 3 minutes after the
vane has moved to the hori-
zontal position.
• When the
E
N
A
V
button is
pressed again, the vane
returns to the previously-
set position and the air con-
ditioner starts the cooling or
drying operation in approx.
3 minutes.
The air conditioner starts heat-
ing operation approx. 3 min-
utes after the vane has moved
to the horizontal position.
• Sometimes the area around
your feet may not warm. To
warn the area around the
feet, set the horizontal vane
to
(AUTO) or the down-
ward blowing position.
• When the
E
N
A
V
button is
pressed again, the vane
returns to the previously-set
position and the air condi-
tioner starts heating opera-
tion in approx. 3 minutes.
Horizontal
position
NOTE:
• If you make the air
fl
ow not to blow directly onto your body by pressing
E
N
A
V
button, the compressor stops for 3
minutes even during the operation of the air conditioner.
• The air conditioner operates with decreased air
fl
ow until the compressor turns on again.
