4
Remote controller
NAME OF EACH PART
Signal transmitting section
ON/OFF (operate/
stop) button
Operation display section
Temperature buttons
Fan speed control button
Operation select button
ECONO COOL button
RESET button
Off-timer button
On-timer button
CLOCK set button
Vane control button
TIME set buttons
Forward button
Backward button
(This diagram shows an overall view.)
Open the front lid.
Auto restart function
PREPARATION BEFORE OPERATION
These models are equipped with an auto restart function. If you do not want to use this function,
please consult the service representative because the setting of the unit needs to be changed.
Auto restart function is ...
When the indoor unit is controlled with the remote controller, the operation mode, the set temperature and the fan speed are
stored in the memory. If a power failure occurs or the main power is turned off during operation, “Auto restart function” sets
automatically to start operating in the same mode as the one set with the remote controller just before the shutoff of the main
power. (Refer to page 6 for details.)
Insert the power supply plug into the power outlet and/or turn the breaker on.
WARNING:
Remove dirt from the power supply plug and insert the plug securely.
If dirt adheres to the plug or insertion is incomplete, it may cause a
fi
re or an electric shock.
Indoor and/or Outdoor unit
NOTE
Use the remote controller provided
with the unit only.
Do not use other remote controller
