8
®§,{4/3z|
3.5.2 Vane·Vent. (Lossnay)
µ[,}}3|~/,0,|·
F1
F2
F3
F4
Main
Main display:
Cursor
Page
Main menu
Vane
·
Louver
·
Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
µ»4|,},//3|~·
F1
F2
F3
F4
Fri
Swing
Off
Off
Louver
Vent.
Vane
Cool
Room
Auto
Set temp.
Mode
Temp.
Fan
Fri
µ»,|/},//3|~·
F1
F2
F3
F4
Fri
Low
Vent.
µ,/{|3|~/z/,43|0,|·
F1
F2
F3
F4
Main
Main display:
Cursor
Page
Main menu
Vane
·
Louver
·
Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
-
nay)” from the Main menu (refer to
page 7), and press the [SELECT]
button.
Press the [F1] or [F2] button to go
through the vane setting options:
“AUTO”, “Step 1”, “Step 2”, “Step 3”,
“Step 4”, “Step 5” and “Swing”.
Select the desired setting.
Auto
Auto
Swing
Step 1
Step 2
Step 4
Step 3
Swing
Step 5
Select “Swing” to move the vanes
up and down automatically.
When set to “Step 1” through “Step
¬É$ 9 ¢; Ê -
lected angle.
»
under the vane setting icon
This icon will appear when the
vane is set to “Step 5” and the
fan operates at low speed during
cooling or dry operation (depends
on the model).
The icon will go off in an hour,
and the vane setting will auto-
matically change.
Press the [F3] button to go through
the ventilation setting options in the
order of “Off”, “Low”, and “High”.
* Settable only when LOSSNAY
unit is connected.
Off
Low
High
Off
Low
High
ȬA A
units may be interlocked with cer-
tain models of ventilation units.
Press the [RETURN] button to go
back to the Main menu.
Reset
1
horizontal
2
3
4
5
Note: “0” indicates all outlets.
®C ¯¢
¢
Downward
Outlet No.3
Outlet No.4
Outlet No.2
Outlet No.1
MITSUBISHI
ELECTRIC
label
Remote controller setting
¨¯¢ A
;8¯¢-
tion setting of remote controller.
Fixed
¨¯¢ AÊ
in particular direction.
* When it is cold because of direct
airflow, the airflow direction can be fixed
horizontally to avoid direct airflow.
Note:
¸
{3|~ }3|~ z,{4/3z| /, 3{,/3z|4+ 3|34/3z| z| /, }{,,|
does not change in sync with the directional vanes on the unit.
¸
[43+45+,3{,/3z|},,|z|/,/,zx|3/z||,/,
¸
)|/,xz++z3|~4},}/,4/4+43{3{,/3z|3++3xx,{x{z0/,
3{,/3z|3|34/,z|/,{,0z/,z|/{z++,{3}+4
¦3+,/,3}+43}3|
[\w¨z{1¤§
}/4/,}
)00,34/,+4x/,{}/4{/3|~,4/0z,«3+,/,}}/,03}43/-
3|~xz{/,0z,4|~,/z/42,,xx,/¬
® )| ,4/ 0z, ,| {zz0 /,0,{4/{, 3} 3~,{ /4| /, /,0-
perature setting.
µ¶z/z},//,£,z|43{3{,/3z|«§|+xz{
3{,{,0z/,z|/{z++,{¬·
Note:
¸
3}x|/3z|4||z/5,},/,,|3|~z|/,z/zz{|3//z5,
connected.
» For PLA-(Z)RP.BA and PLA-SP.BA series, only the particular outlet
;Ê ¢;¢6À Ê$
8Ê98 6²À
outlets follow UP/DOWN air direction setting of remote controller.)
¯
1+4|4/3z|zxz{
» “Refrigerant address No.” and “Unit No.” are the numbers given to
each air conditioner.
» “Outlet No.” is the number given to each outlet of air conditioner.
(Refer to the illustration below.)
» Ë¿´Ì¢ É ² ©µÊ6
