En-3
ø3 in. (ø75 mm)
2-2. HOLE DRILLING
1) Determine the wall hole position.
'ULOOD¡LQ¡PPKROH7KHRXWGRRUVLGHVKRXOGEHWRLQWRPPORZHUWKDQWKHLQGRRU
side.
3) Insert wall hole sleeve (C).
2. INDOOR UNIT INSTALLATION
*
Do not open the damper
of the lower air outlet.
Front horizontal
vane
Rear horizontal
vane
Front panel
Front panel
Push
Indoor unit
Indoor unit
Outdoor side
LQPP
2-3. INDOOR UNIT PREPARATION
Remove the front panel of the indoor unit.
1) Push the 2 locations marked “PUSH” on the upper part of the front grille until a
“click” is heard.
2) Open the front grille toward you.
3) Remove the 2 screws.
4) Grasp the rear horizontal vane at the upper air outlet, and open it.
5) Push the 3 locations on the top of the front panel, and then pull the upper part
of the front panel toward you.
6) Remove the front panel while lifting it up (slightly).
*
The front panel can be removed without opening the damper of the lower air
outlet.
2-1. FIXING OF INDOOR UNIT MOUNTING BRACKET
)LQGDVWUXFWXUDOPDWHULDOVXFKDVDVWXGLQWKHZDOODQG¿[EUDFNHWKRUL]RQWDOO\ZLWK¿[LQJVFUHZV
7RSUHYHQWEUDFNHWIURPYLEUDWLQJEHVXUHWRLQVWDOOWKH¿[LQJVFUHZVLQWKHKROHVLQGLFDWHGE\>!@LQWKHLOOXVWUDWLRQ)RUDGGHGVXSSRUW¿[LQJVFUHZVPD\DOVR
be installed in other holes.
Wall
Indoor side
HOLE POSITIONS
6-1/2(165)
8-1/16(205)
3-3/4(96)
4-5/8(118)
1-3/8(35)
1-3/4(45)
When the unit
is installed on
the wall.
When the unit is installed
RQWKHÀRRU
FOR LEFT PIPING
FOR REAR OR LEFT-REAR PIPING
(The drawing below is a front view of the indoor unit installation location.)
FOR RIGHT PIPING
FOR RIGHT DOWNWARD OR LEFT DOWNWARD PIPING
(The drawing below is a view of the bottom of the indoor unit from above.)
Pipe connecting port
(Gas)
Pipe connecting port
(Liquid)
inch (mm)
Содержание Mr.Slim MFZ-KA09NA
Страница 23: ......
Страница 24: ...JG79A164H01 HEAD OFFICE TOKYO BLDG 2 7 3 MARUNOUCHI CHIYODA KU TOKYO 100 8310 JAPAN ...
