background image

¡

LOW TEMP

The unit operates continuously automatically controlling airflow
according to room temperature. The air flow is strongest below 15

°

C.

The use of LOW TEMP mode is recommended when the Low
temperature indicator 

is lit.

When the temperature is low, condensation may still form on windows exposed to the

outside air even when LOW TEMP mode is operating.

¡

MILDEW GUARD

The unit lowers humidity levels automatically once a day, suppressing
mildew growth.

¡

The unit operates intermittently for 2-4 hours a day (24 hours).

¡

The operating time varies depending on the humidity.
The unit continues to operate when the humidity does not
decrease.
• Humidity 40%

Approx. 2 hours

• Humidity 50%

Approx. 4 hours

Refrain from turning on ventilation fans or opening windows or doors as this lowers performance.

Mildew growth may still occur due to the fungus type and conditions of the room.
• E.g. Rooms that contain excessive condensation, bathrooms, and places with bad airflow (insides of

closets and behind furniture).

This mode does not remove existing mildew.

Do not use in conjunction with OFF Timer mode. Effects may not be achieved.

14

Setting modes

Inf

ormation

Information

HIGH, LOW, MILDEW GUARD and LOW TEMP

To leave the unit operating continuously, use HIGH and LOW modes. To suppress mildew, use MILDEW GUARD
mode. For preventing condensation or when the room temperature is low, use LOW TEMP mode.

Changes with every press

Press

¡

Frame appears around selected mode.

¡

The amount of dehumidification decreases with the temperature and humidity.

¡

The humidity level cannot be set with HIGH, LOW, MILDEW GUARD, and LOW TEMP.

¡

HIGH

The dehumidifier operates
regardless of the humidity level.

Airflow is strong.

¡

LOW

The dehumidifier operates
regardless of the humidity level.

Airflow is weak.

ON

24 hours

Dehumidifies

Dehumidifies

Standby

24 hours

Standby

How is mildew

Mildew is unable to produce new spores if dried as mycelia. The Mildew

growth suppressed?

Guard feature applies this principle (However, the spores themselves are 
resilient to dry conditions.)

“Identification of Aspergillus and Penicillium”

<Research paper by Dr. K. Abe of the Environmental Biology Research Center>

Repeat

3

9

e_mj_e22wx_c(01_19)_e33.qx  9/25/06 4:25 PM  Page 14

Содержание MJ-E22WX-H





























Отзывы: