background image

23

Oper

ating

Tr

oub

leshooting

Maintenance

Do not use detergents, cleaning agents for heat exchange equipment, abrasive powders, chemically treated dusters, 

gasoline, benzene, thinners or other solvents, as they can damage the unit or the water tank, which may result in 

leakage.

Cleaning 

Water tank • Main unit

Wipe with a soft cloth.

Floating element

Do not remove or dismantle.

 

z

The unit draws in dust present in the air, and this 
may cause the tank to 

gradually become dirty

If the dirt does not come off easily, wash with 
cold or warm water, then wipe with a soft, dry 
cloth.

 

z

Mildew may form in the tank unless kept clean.

Once every two weeks

Pre-filter

Debris clogging the pre-filter reduces the 

effectiveness of the dehumidifier. Clean once every 

2 weeks.

For maintenance procedures see 

10

1

  Remove the front panel and  

pre-filter.

2

  Remove the photocatalytic 

filter.

3

  Clean the pre-filter.

4

  Fit the photocatalytic filter.

5

  Attach the pre-filter and front 

panel.

Remove grit with 

vacuum cleaner

Hose with lukewarm water when 

excessively soiled. Dry well.

e_mj_e16vx_a1.indb   23

2016/06/27   14:38:04

Содержание MJ-E16VX-A1





























Отзывы: