background image

5

Bef

or

e Using the Unit

Do not cover the front or side 

air intakes or the air outlet 

with cloth, curtain, etc.

This results in poor ventilation and 

may cause 

heat generation/fire

.

Do not stand on, sit on or lean 

against the unit.

The unit may tip over causing 

injury

.

Do not put vases or any other 

objects filled with water on the unit.

Water may leak into the unit adversely 

affecting electric insulation and cause 

electric shock and/or fire by short-

circuiting

.

Do not use the unit where it may be 

exposed to direct sunlight or other 

weather conditions. 

(This unit is for indoor 

use only.)

This may cause 

overheating, 

electric shock and/or fire 

caused by an electric leak

.

Do not use the unit in narrow, 

enclosed places such as inside 

closets, between  

pieces of furniture, etc.

This results in poor 

ventilation and may cause 

heat generation and/or fire

.

Do not use combustion appliances 

in the path of the  

air outlet.

This may cause 

incomplete combustion

 

in the appliance.

Do not use the unit in places 

where chemicals are used 

(such as hospitals, factories, 

laboratories or beauty salons).

Chemicals and solvents evaporated in 

the air may harm the unit and cause 

water in the tank to leak, 

resulting in 

damage to property

.

Do not use the unit for special 

purposes, such as preservation of food, 

art or scientific works. 

This may negatively 

affect 

the quality of the 

items stored

.

Do not drain water continuously 

if there is a possibility that 

temperature around the hose could 

drop to freezing point. 

Water inside the hose may freeze and 

prevent the water in the tank from flowing out.

The water may leak from the unit and 

damage surrounding objects

.

Do not use the unit in places 

that may be subject to oil or 

flammable gas leakage. 

Such a leak around the unit may cause 

combustion

 and 

fire

.

Do not remove the Styrofoam 

from the floating element. 

The floating element will not  

be able to detect a full tank  

resulting in water leakage,  

which may 

damage surrounding  

objects or cause electric shock and/or 

an electric leak

.

Do not wash the unit  

with water. Do not  

use the unit where it  

is likely to come in  

contact with water. 

Exposure to water may result in 

fire or 

electric shock caused by an electric leak

.

Do not point air-flow from the unit 

directly at the body. 

If air-flow is directed at 

the body for long periods, 

it may 

harm one’s 

physical condition

 and 

lead to dehydration

.

Install the unit in a location where 

the floor is flat and stable.

If the unit falls over, the water collected 

in the water tank may leak damaging 

surrounding objects and in turn result 

in 

fire or electric shock caused by an 

electrical leak.

Grasp the plug and remove 

from the power socket.

When removing the plug from  

the power socket, do not pull  

on it diagonally or by the cord as this 

may cause the projections/wiring to be 

damaged resulting in a short circuit, 

electric shock or fire

.

Before moving the unit always 

switch it off, unplug it and remove 

water from the water tank.

Moving the unit with water in its tank may 

cause the water to leak and 

damage the 

surrounding objects and in turn result 

in electric shock and/or an electric leak

.

After emptying the tank, transport the 

unit by grasping the handle firmly.

Losing your footing while carrying the 

unit may cause 

personal injury or 

damage to the floor

.

When using the continuous 

drainage outlet, make sure to 

position the hose so that the 

water drains without obstruction.

The water in the tank may leak and 

damage surrounding objects

.

CAUTION

e_mj_e16vx_a1.indb   5

2016/06/27   14:37:58

Содержание MJ-E16VX-A1





























Отзывы: