Mitsubishi Electric MJ-E16VX-A1 Скачать руководство пользователя

Страница: 26 / 28

Dehumidified air passes through heating coils causing it to warm

(this unit is not a cooler). This is not a malfunction.

The unit blows warm air

Check to see if the temperature/humidity is low.

Low room temperature/humidity reduces dehumidifying effectiveness.

Confirm the current humidity reading (in winter, the air is cooler reducing

the amount of water collected). This is not a malfunction.

Water does not collect in

the water tank (minimal

dehumidifying results)

Is the unit set to drying inside mode?

This function activates automatically after the unit finishes operating.

The unit continues to

operate even though it is

turned off

Check to see if the room is not too large.

Check to see if the exits to the room are open.

→

Refrain from opening doors/windows during operation.

Check to see if steam producing appliances such as kerosene

heaters are on in the vicinity.

The humidity level does

not reach the level set

Hygrometer readings differ from place to place even if in the

same room. Use the unit humidity reading as an estimate.

The hygrometer reading on

the unit differs from other

hygrometers in the room

Symptom

Cause/Remedy

Press the Swing louvre button again.

The louvre does not move

as set

The residue is from final product testing at the factory.

It is not a result of a malfunction.

The water tank contains

liquid or white water residue

The residue is from debris in the air.

→

Clean according to the maintenance procedures.

There is black residue on

the inside of the water tank

and lid

Check to see if the power cord is correctly plugged.

→

Plug the power cord properly into the power socket.

Check to see if anything is blocking the air intake or outlet.

→

Remove the obstruction.

Check to see if the pre-filter is clogged.

→

Clean according to the maintenance procedures.

Check to see if the unit is in EASY DEHUMIDIFYING, MILDEW

GUARD, or AUTO.

The unit is automatically controlling the dehumidifier, fan, and

standby times.

13–15

Check to see if the water tank is full.

→

Empty the water tank and return it to its original position.

Check to see if the water tank is inserted properly.

→

Adjust the position of the water tank.

12·21

Check to see if the unit is in defrosting mode.

The unit activates defrosting mode when the room temperature

drops below 15°C. The dehumidifier and blower functions stop

during defrosting.

The unit does not turn on

(no air comes out)

The unit keeps turning off

indicates

Louvre does not

swing

Stops after a

short time

lights

For the symptoms listed below, refer to the remedies listed right.

Troubleshooting

e_mj_e16vx_a1.indb 26

2016/06/27 14:38:05

Содержание MJ-E16VX-A1





























Результаты поиска

Содержание MJ-E16VX-A1

Отзывы:

Похожие инструкции для MJ-E16VX-A1

Бренды по названию

Популярные бренды

Mitsubishi Electric MJ-E16VX-A1, Инструкция по эксплуатации

Результаты поиска

Содержание MJ-E16VX-A1

Отзывы:

Похожие инструкции для MJ-E16VX-A1

Бренды по названию

Популярные бренды