Mitsubishi Electric MJ-E15BX-S1-IT, Руководство по обслуживанию

Страница: 30 / 49

Tank
Pic. 1
Special screws Left case
Left and right
case setscrews
Right case
setscrews
Rear case
setscrews
Left case
setscrews
Catches
Figure 1
Filter cover
Pic. 1
Catches
Cover leg
Pic. 2
Catches
Catches
Front case
setscrews
Front case
* Caution
The screws are different.
30
12. Disassembly and Reassembly Hints
1. Removing the water tank
2. Removing the fi lter cover and rear case
3. Removing the front case
Step 1) Pull out the tank.
Step 1) Hold the fi lter cover tabs, pull the fi lter cover
toward you, and remove.
2) Remove the special screws (2), left and right
case setscrews (right:2, left:1) and the rear case
setscrews (2).
3) Detach the catches (5 points on the right and
left), and remove the right and left cases.
4) Pull the lower side of the rear case toward you,
and detach the catches on the upper side.
(See Figure 1)
(See Pic. 1)
(See Pic. 2)
(See Pic. 2)
Step 1) Remove the water tank and the left and right
cases following the steps in sections 1 and 2
above.
2) Detach the catches (3 points) on the cover legs,
and remove the cover legs.
3) Remove the front case setscrews (3).
4) Detach the catches on the front case (top), the
net frame (2 points), and the casing (3 points),
and remove the front case.
Caution) Because the catch is inside the case, twist it a
little to the left when removing.
(See Pic. 1)
e01̲mj̲e15bx̲S1-IT.indd 30 2010/06/10 17:30:18