Mitsubishi Electric MELSERVO MR-HP30KA, Инструкция по эксплуатации

Страница: 84 / 115

10 - 1
10. OPTIONS AND AUXILIARY EQUIPMENT
10. OPTIONS AND AUXILIARY EQUIPMENT
WARNING
Before connecting any option or auxiliary equipment, make sure that the charge
lamp is off more than 20 minutes after power-off, then confirm the voltage with a
tester or the like. Otherwise, you may get an electric shock.
CAUTION
Use the specified auxiliary equipment and options. Unspecified ones may lead to a
fault or fire.
10.1 200V class dedicated options
10.1.1 Regenerative brake option (200V class)
CAUTION
The specified combinations of regenerative brake options and servo amplifiers
may only be used. Otherwise, a fire may occur.
(1) Combination and regenerative power
The regenerative power values in the table are the regenerative power of the resistor and are not the
rated power.
Regenerative Power [W]
Servo Amplifier Converter unit
MR-RB139 (1.3 )
(Note) Three MR-RB137
(1.3 ) in parallel
MR-J2S-30KA/B MR-H30KAN/BN
MR-J2S-37KA/B MR-H37KAN/BN
MR-HP30KA 1300 3900
Note. The composite resistor value of three options is 1.3 . The resistor value of one option is 4 .
(2) Parameter setting
When using the regenerative brake option, set the parameter of the converter unit. Match parameter
No. 0 to the regenerative brake option used.
ParameterNo.0
Regenerative brake option selection
0: Not used
1: MR-RB139
2: MR-RB137(3 pcs.)
(3) Regenerative loss of servo amplifier and servo motor
Servo Amplifier Inverse Efficiency [%] C Charge [J]
MR-J2S-30KA/B MR-H30KAN/BN
MR-J2S-37KA/B MR-H37KAN/BN
90 390
Downloaded from ManualsNet.com search engine