Mitsubishi Electric MELSEC Q80BD-J71GF11-T2, Руководство пользователя

Страница: 171 / 248

16 TROUBLESHOOTING
16.9 Error Code List
169
16
D214H Transient data request error Correct the data length at the request source, and retry the operation.
D215H Transient data request error Change the mode to Online, and retry the operation.
D216H to
D217H Transient data request error Correct the request command at the request source, and retry the operation.
D218H Transient data request error At the request source, correct the number of the data to be read from or written to the device, and retry
the operation.
D219H Transient data request error Correct the attribute code at the request source, and retry the operation.
D21AH Transient data request error Correct the access code at the request source, and retry the operation.
D21BH to
D21CH Transient data request error Abnormal transient data were issued from the CPU module.
Replace the CPU module and retry the operation.
If this error persists, please consult your local Mitsubishi representative.
D21DH Network No. error in transient data A cable test cannot be applied to a network of a different network number. Correct the data in "Testing
Station Setting", and retry the cable test.
Transient data that is not applicable to a different network were received. Correct the network number or
target station number at the request source, and retry the operation.
D21EH Target station No. error in transient
data The communication test cannot be executed with the relay station(s) specified. Correct "Communication
Destination Setting", and then execute the communication test again.
Transient data of the application type that is not executable for the own station were received. Correct
the application type or target station number at the request source, and retry the operation.
D21FH Target station type error (dedicated
instruction) The SEND instruction is not applicable to head modules.
Modify the program so that the SEND instruction will not be used for head modules.
D220H No master station Add a master station to the network.
D222H Transient data request error Correct the request command at the request source, and retry the operation.
D223H Transient error Check the network condition by CC-Link IE Field Network diagnostics, and take action.
Check if the cables and switching hub are connected properly.
If the request source resides in another network, check if the routing parameters are correctly set, and
take corrective action.
If this error persists, please consult your local Mitsubishi representative.
D22EH Station No. setting not available for
the target station Although change of the target station number was attempted online from the master station, the target
station does not have the online station number setting function.
• Check the manual for the target station for availability of the station number setting function.
• If the function is supported by the model, please consult your local Mitsubishi representative.
D22FH No baton pass for the target station Check the communication status of the station whose station number will be changed.
D230H Incorrect station No. specified Station number change was attempted for the own station (master station).
Check if no station number has been set for the target station of station number change.
D231H Station No. already set for the target
station For the target station of station number change, a station number has already been set.
Check if no station number has been set for the target station of station number change.
D232H Station No. setting target not exist The target station of station number change does not exist.
Check if no station number has been set for the target station of station number change.
D234H No baton pass Check the communication status.
D235H Transient error Check the network condition by CC-Link IE Field Network diagnostics, and take action.
Check if the cables and switching hub are connected properly.
If the request source resides in another network, check if the routing parameters are correctly set, and
take corrective action.
If this error persists, please consult your local Mitsubishi representative.
D240H to
D243H Target network module failure
(dedicated instruction) Correct the following settings at the request source of the dedicated instruction, and retry the operation.
• D240H: Network number
• D241H: Target station number
• D242H: Command code
• D243H: Channel used (correct within the range)
If the request source resides in another network, check if the routing parameters are correctly set, and
take corrective action.
D244H Incorrect transient data Correct the transient data at the request source, and retry the operation.
If this error persists, please consult your local Mitsubishi representative.
D245H Target station No. error (dedicated
instruction) Correct the target station number at the request source of the dedicated instruction, and retry the
operation.
If the request source resides in another network, check if the routing parameters are correctly set, and
take corrective action.
D246H Incorrect transient data Correct the transient data at the request source, and retry the operation.
If this error persists, please consult your local Mitsubishi representative.
Error
code Error code Corrective action