4
Odor monitor
The state of air contamination from cigarette odor and other odors is detected by the odor sensor and then indicated.
PM2.5 monitor
The state of contamination from PM2.5 and other small particles is detected by the PM2.5 Sensor and then indicated.
Dust monitor
The state of air contamination from pollen, dead bodies of mites, and other large particles is detected by the PM2.5 Sensor and then indicated.
PM2.5 Sensor
<Size of dirt particles>
Viruses
Dust, particles harmful to the lungs
Feces and dead bodies of mites
Cigarette smoke particles
PM2.5 monitor
Dust monitor
Pollen
Mainly particles of 2.5 μm or less
Mainly particles greater than 1 μm
0.01
0.1
1
0.5
2.5
10
100 (μm)
PM2.5
This optical sensor detects the number of particles. The monitor indications are divided into “PM2.5” and “Dust” according to the size of the particles.
* This unit does not detect particles smaller than 0.5 μm.
Adjusting the Sensitivity of the PM2.5 Sensor
P.10
Main Unit
Control Panel
Front
Rear
Odor sensor
Detects cigarette odor and other odors.
P.7, 14
Control panel
Platinum catalyst
Special washable activated charcoal filter (Activated charcoal filter)
Consumable part
P.16
Pre-filter unit
(How the Cleaning Mechanism W
orks
P.11
)
Pre-filter
P.8, 12–13
Blower fan
Two-layer HEP
A filter
Consumable part
P.16
Dust box unit
P.12-14
Cleans the pre-filter automatically and collects the dust into the dust box.
Inlet panel
Handle
P.
3
Used when moving the unit.
Air inlet
PM2.5 Sensor
P.7, 10, 14
Detects air contamination from cigarette smoke, dust, and pollen.
Filter replacement sticker
P.8, 16
Write the filter use start date. This will ser
ve as a
rough guide for filter replacement.
Power cord
A catalyst that combines platinum, which exhibits high chemical reactivity
,
with a catalytic substance that has numerous nano-sized pores. It absorbs and breaks down the sources of various odorants causing complex odors in daily life that are difficult to sense.
<High Efficiency Particulate Air filter> A highly efficient filter capable of filtering at least 99.97% of particles with a diameter of 0.3 μm (micrometer).
What is a platinum catalyst?
What is a HEP
A filter?
Automatic Cleaning
P.11
Operation
P.
9
Operation
P.
9
Operation
P.
9
Operating the Louvre
P.10
z
Auto Cleaning switch
Turns ON/OFF automatic cleaning.
z
Auto Cleaning lamp (yellow)
Lights during automatic cleaning.
z
Manual switch
Changes the air volume.
z
Air volume lamps (green)
Indicate the air volume during operation.
z
Operation On/Off switch
Turns ON/OFF operation.
z
Auto switch
Changes the operation.
z
Operation mode lamps (green)
Indicate the operation mode.
z
Smart Search switch
Turns the louvre swing OFF/ON.
z
Smart Search lamp (green)
Lights when Smart Search is ON.
z
Clean Dust Box lamp (red)
When it becomes time to empty the dust box, this lamp lights to notify you.
P.14
z
Replace Filter lamp (red)
When it becomes time to replace the HEP
A
filter
, this lamp lights to notify you.
P.16
z
Reset button
Cancels the Clean Dust Box lamp.
P.14
Cancels the Replace Filter lamp.
P.16
z
Triple clean monitors (green/yellow/orange)
Orange
Yellow
Green
Yellow
Green
Green
Air is
clean
Air is contaminated
The state of air contamination detected with the odor sensor and PM2.5 Sensor is indicated by lamps lighting in three steps.
Odor sensor
This semiconducting sensor detects odors and other gases. It also responds to wind from air conditioners, electric fans, and other appliances, odorless gases, and perfumes.
Names and Functions of Parts
Air outlet
(The louvre
P.10
is inside the main unit.)
2.
Names
and Func
tions of Parts
Note:
This page is extracted from the full version instruction manual.
