Mitsubishi Electric LY2-3300-B0B, Инструкция по эксплуатации

Страница: 5 / 12

3
Periodical cleaning
1 . Machine
2 . Motor
Remove dust from the motor filter every one or two months. (Continued operation with the filter
clogged with lint or dust may overheat the motor.)
3 . Control Box
Remove dust from the connector. (If the connector is covered with dust, the machine might
malfunction.)
4
Installation of the belt cover
1 . Install the belt cover on the machine side for safety. Refer to the provided instruction document
contained in the same package.
2 . Install the belt cover on the motor side for safety.
5
Precaution on operation
( 1 ) When the power is turned on or off, keep foot away from the pedal.
( 2 ) It should be noted that the brake may not work when the power is interrupted or power failure
occurs during sewing machine operation.
( 3 ) Since dust in the control box might cause malfunction or control troubles, be sure to keep the
control box cover close during operation.
( 4 ) Do not apply a multimeter to the control circuit for checking, otherwise voltage of multimeter
might damage semiconductor components in the circuit.
USAGE PRECAUTION
Hook
Feed dog
Hook
Feed bar
● Remove the throat plate and clean the
feed dog. Reassembly should be done by
screwing in the screw 2-3 rotations by hand
at first, then tightening them evenly using a
long-shafted screwdriver.
● Lean the machine head and clean the hook
and remove any dust and /or lint inside the
bobbin case.
— 2 —