Mitsubishi Electric LMAP02, Руководство по установке

Страница: 3 / 20

2
CAUTION
Do not install the unit where combustible gas may leak.
If the gas leaks and accumulates around the unit, an
explosion may result.
Do not use in any special environment.
Using in any place exposed to oil(including machine oil),
steam and sulfuric gas may deteriorate the performances
significantly or given damage to the component parts.
When installing the unit in a hospital, communication
station, or similar place, provide sufficient protection
against noise.
The inverter equipment, private power generator, high-
frequency medical equipment, or radio communication
equipment may cause the air conditioner to operate
erroneously, or fail to operate. On the other hand, the air
conditioner may affect such equipment by creating noise that
disturbs medical treatment or image broadcasting.
Do not wash with water.
Doing so may cause an electric shock or a malfunction.
Do not install in any steamy place such as bath room or
kitchen.
Avoid any place where moisture is condensed into dew.
Doing so may cause an electric shock or a malfunction.
Do not touch any PCB(Printed Circuit Board) with your
hand or tools. Do not have dust collected on the PCB.
Doing so may cause an electric shock or fire.
Do not install in any place where acidic or alkaline
solution or special spray are other be used.
Doing so may cause an electric shock or a malfuction.
Do not install in any place at a temperature of more then
43 ˚C or less than -15˚C.
It may become the cause of modification and failure.
Safety dispose of the packing materials.
Tear apart and throw away plastic packaging bags so that
children will not play with them. If children play with a plastic
bag which was not torn apart, they face the risk of suffocation.
Be sure to shut off the power source of the unit and all
the other unit to connected to the unit before wiring.
Doing so may cause an electric shock or a malfunction.
Use only an earth leakage breaker and fuse of the
specified capacity.
If no earth leakage breaker is installed, it may cause an
electric shock.
Using fuse and wire or copper wire with too large capacity
may cause a malfunction of unit or fire.
A power-supply line and a transmission line do not band
together, or are not contained in the same metal pipe.
Doing so may cause a malfunction of unit.
This appliance must be earthed.
Make sure to install a protective earth(PE) line. Do not
connect the protective earth line to gas or water pipes,
lightning conductors or telephone grounding lines. Improper
grounding may cause an electric shock.
Wire so that it dose not received any tension.
Tension may caused wire breakage, heating or fire.
Use standard wires in compliance with the current
capacity.
A failure to this may result in an electric leakage, heating or
fire.
Never connect the power source to the transmission line.
Doing so may caused a malfunction or a failture.
Do not touch the switches with wet fingers.
Touching a switch with wet fingers can cause electric shock.