29
Connecting a VCR directly to LCD Side Panel
Figure 1. Connecting the VCR Audio/Video.
NOTE: The LCD Display side panel connections shown below can only be used when the HD-6000 is not connected to
the LCD Display.
You may connect to the S-VIDEO or VIDEO
terminal but not to both.
Composite Video with Audio or S-
Video with Audio (Recommended)
(Figure 1)
1. Connect a video or a S-Video cable from VIDEO
OUT on the VCR back panel to VIDEO INPUT
on the LCD Display side panel.
2. Connect a set of audio cables from AUDIO OUT
on the VCR back panel to VIDEO INPUT/
AUDIO RIGHT & LEFT on the LCD Display
side panel.
• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel
��
���
�������
���������
��������
���������
�����
�������
�
�
�
�
�
�
�
��������������
�����������������������
��������������������
�������������������
������
����
���
�����
����
�
�
�����
���
�����
���
����������������������
������������
������������
�
�
�
The Display Side Panel is shut-off
when the HD-6000 is connected to the
LCD Display using a HDMI™ cable.
Refer to Chapter 2 in the HD-6000
Owner’s Guide on how to connect A/V
equipment to the HD-6000. The HD-
6000 does not shutoff the PC INPUT.
Содержание L423FR
