background image

2

 

Do not install in locations where salt 
damage may occur, or where corrosive, 
neutral, or reductive gases are present.

This may cause malfunctions. 

 

Do not scratch, damage, process, 
excessively bend, pull, twist or bundle 
the power cable, and do not place heavy 
objects onto it or trap it. 

Doing so may damage the power cable, causing 
fi res or electric shocks.

 

Do not install when the product (power 
cable) is electrifi ed. 

Doing so may result in electric shocks.

 

Do not attempt any disassembly or 
modifi cation of the appliance that is not 
expressly stated in this manual.

Doing so may result in fi res, electric shocks or 
injuries.

 

Do not use in a hot location such as a 
shower room, where condensation may 
form on the appliance, or where water 
may splash directly onto the appliance. 

This may cause electric shocks or malfunctions.

 

Electrical wiring work should be done by a 
certifi ed professional in conformance with 
the technical standards for the equipment 
or offi cial standards. 

Incorrect wiring can cause electric shocks and 
fi res. 

 

Use single-phase 220-240V power.

Using the incorrect power supply may cause 
fi res, electric shocks or malfunctions.

 

Use exclusive wiring

Using this appliance with other devices on a 
branch socket may cause abnormal heat, which 
may cause fi res. 

 

Be sure to install a ground-fault circuit 
interrupter. 

Not doing so may result in electric shocks. 

 

A means for disconnection must be 
incorporated in the fixed wiring in 
accordance with the wiring rules. 

 

Cleaning and user maintenance shall not 
be made by children without supervision.

 

Install securely in a location strong enough 
to support the weight of the appliance. 

Injuries may be caused if the appliance falls off 
the wall.

 

Wear gloves when installing the appliance.

Not doing so may result in injuries.

Follow 

instructions 

Follow 

instructions 

Safety Precautions 

Warning 

The following may lead to death or serious personal 
injury if the appliance is handled incorrectly.

Cautions 

The following may lead to injury or damage to 
property if the appliance is handled incorrectly.

Prohibited 

Prohibited 

Do not 

disassemble 

Do not use in the 

bathroom/

shower room

Содержание JT-SB216JSH2-H-NE
















Отзывы: