English
−
NA
-
7
−
−
NA
-
6
−
Cleaning the drain pipe
4
At least once a week
• Gently wipe any dirt from the drain using a soft cloth.
• Do not pour water directly onto the drain pipe.
NOTE
Cautions
• Ensure that the side cover is fitted properly.
Drain
collection
outlet
Drain pipe
4 After cleaning, attach the side cover.
－
6
－
Drain collection
outlet
Drain pipe
Handle
Drain hole
2 Hook your fi ngers into the handle on the
side cover, and pull it diagonally upwards
1 Turn the ground
-
fault circuit interrupter "OFF".
3 Wipe the inside of the side cover and
drain pipe with a well
-
wrung wet cloth
Side cover (inside)
－
7
－
Are any lamps in the display on?
Has a blackout occurred?
Has the dryer been used continually for
more than 30 seconds?
Are any lamps in the display fl ashing?
The heater lamp is off.
Has a blackout occurred?
The ground fault circuit interrupter is "OFF".
This may fl ash if there is a malfunction in
the power supply.
There is no unevenness, even when touched by hand.
(No feeling of cracking)
If the above fi xes do not work, turn off the breaker, and have your dealer inspect and if necessary
repair the unit. (Costs are as agreed with the dealer.)
•
Contact your dealer for any changes to
settings or adjustments etc.
Costs are as agreed with the dealer.
•
Do not attempt to modify or disassemble
this unit yourself.
Air conditioning is not working.
Is the room temperature too high?
Was the ground
-
fault circuit interrupter turned on while
your hands or an object was inside the hand drying area?
Are you putting your hands in all the way?
Is the sensor blocked by dirt or dust?
Is the black wall area in the hand drying area white with dirt?
•
Turn the ground fault circuit interrupter on.
•
Contact the dealer about any changes to the settings.
Costs are as agreed with the dealer.
•
If the room temperature is above 86
º
F (30
º
C), the
heater will stop working to prevent the temperature
from rising too high.
•
Turn the ground
-
fault circuit interrupter on.
•
Turn the breaker off, check that all of the lamps on
the display section are off, and then wait for 1 minute
before turning the breaker back on.
•
This pattern occurs when the product is molded (manufactured).
It does not affect product performance, and is not a malfunction.
•
The air may not feel warm if the room temperature is
less than 68
º
F (20
º
C).
•
Turn the ground
-
fault circuit interrupter "OFF", and
when the display lamps all go out, remove any foreign
substances or dirt. Then turn the ground
-
fault circuit
interrupter "ON".
•
If the hand dryer is used continually for more than 30 seconds,
the power lamp fl ashes, and the dryer automatically stops.
To continue using the hand dryer, remove your hands, and
then re
-
insert them.
•
Place your hands all the way inside the hand drying area.
No air blows even if
hands are inserted
Stops operating
during hand drying
Air is cold
Air does not
warm up
The lamp does not light up
even when the ground
-
fault
circuit interrupter on.
The display section
lamp fl ashes
Crack
-
like shapes can be
seen around the nozzle
The operating sound is too
loud (Air blow is too strong)
I want to reduce power
consumption (want to
turn off the heater)
Air does not stop
If you think something has gone wrong
Perform the following checks and fi xes.
Check Fix
Problem
Cautions
