English
−
NA
-
3
−
－
3
－
Hand drying area
Black wall area
Blue light
Main unit
•
The blue light does not have a sterilizing
effect.
•
Do not look directly into the blue light.
Drain tank
Side cover
Front panel
Tank cover
Air fi lter
Display
Power lamp
Heater lamp
■
Names of Parts
※
Shaded areas in the fi gure indicate antibacterial material.
Sensor
4
3
2
1
■
Turn the ground
-
fault circuit interrupter "ON".
■
After washing hands
How to use the unit
Insert hands from the side
Bring hands upwards
Wet hands
※
Repeat 2
-
3 times
Automatic Stop Function
The power lamp fl ashes and the dryer stops automatically if the unit is used continually for more than 30 seconds.
To continue using the hand dryer, remove your hands, and then re
-
insert them.
Simple heater
Softens the feeling of cold air.
If the room temperature is above 80
ºF (
30
ºC
), the heater will stop working to prevent the temperature from rising too high.
NOTE
•
If the room temperature is less than 68ºF (20ºC), the air may feel cold.
■
If not using for a long period
Then turn the breaker off.
Caution
●
Do not turn the power on when your hands or an object are inside the hand drying area.
The sensitivity of the sensor may be reduced if the power is turned on while your hands or objects are inside the
hand drying area.
If the sensitivity of the sensor is reduced, please turn the power off and then back on after one minute.
