●
Be sure to hang the backside of the unit
securely on the lower hook, as the mounting
screw will not properly fasten if the unit is not
properly set.
With the power cord running through the hole
provided on the backside, hang the backside of
the unit on the (three) installation panel hooks. With
the unit lightly pressed against the wall, fasten the
unit with the mounting screw (temporarily set in the
screw hole).
(1)
(2)
Remove screws (2 pcs).
Disengage the front panel at its groove from the
unit. Then remove the panel.
Run the power cord through the unit and
secure to the installation panel.
2. Remove the terminal cover
1. Remove the front panel.
Remove the terminal cover mounting-screw. Then
pull to remove the cover toward you.
3
Groove
Front panel
mounting screw
Front panel
Unit
Terminal cover mounting screw
Terminal cover
Terminal block
Installation (Continued)
4
Upper hook
Lower hook
Installation panel
Power cord
Unit mounting screw
Unit mounting screw
Power cord
Power cord hole
5
JT-SB116EH-W-CA-IM_874HD7001-GB 06.12.9 2:13 PM ページ 6
