─
17
─
The following pictures show JT-SB116JH2-W-NA.
(1) Turn off the power supply.
1
Stop the operation.
2
Turn off the circuit breaker on the distribution board.
(2) Front panel
1
Draw out the tank assembly (assy).
Tank assy
2
Unscrew the clamping screws, and remove the front panel.
(Two special (spl) screws 4×16, indicated by
)
Front panel
(3) Power cable
1
Unscrew the clamping screw, and remove the terminal block (TB)
cover.
(One PTT screw 4×6, indicated by
)
2
Unscrew the clamping screws, and disconnect the power cable
leads.
(Two screws, indicated by
)
Power cable
Ground wire
Terminal block
TB cover
Power cable
Terminal block
