Mitsubishi Electric GOT SIMPLE GS2107-WTBD, Руководство пользователя

Страница: 190 / 292

15 - 44
15.8 BACKUP/RESTORE
(4) LCPU
*1 The file register in the Flash card installed in the CPU is always restored without confirming saving.
Select whether restoring or not the file register stored in the SRAM card or standard RAM in the dialog box displayed when
restoration is executed.
When the file register is not restored, the existing file register is deleted.
Therefore, programs of the controller may not work normally.
If a problem occurs in the operation of the controller after restoration, perform the restoration again, including to the file register.
*2 The item can be backed up only.
(5) FX CPU
*1 The data can be backed up or restored with the FX3U(C) series and FX3G(C) series only.
*2 The data can be backed up or restored with the FX3U(C) series only.
*3 The data are stored in the FX3U-32MT-LT-2 only.
Item Description File name
Parameter Parameter for operating a programmable controller PARAM.QPA
Intelligent function
module parameter
Parameter for intelligent function modules IPARAM.QPA
Program Program that the CPU operates (Including SFC program) ***.QPG
Device comment Device comment to be stored in a programmable controller ***.QCD
Boot operation
specification file
Batch file for starting programs stored in ROM and others AUTOEXEC.QBT
Device initial value Setting the device initial value ***.QDI
File register
*1
Data stored in file registers ***.QDR
Sampling trace file
*2
Sampling trace data that the specified device data is
continuously collected with the specified timing
***.QTD
Programmable controller
user data
Any user-created data stored in a memory card ***.*** (Optional)
File for storing device
data Device data used for the SP.DEVST and S.DEVLD
instructions
DEVSTORE.QST
Drive heading The heading of the drive QN.DAT
Remote password Remote password settings 00000000.QTM
Monitor sequence
extension
Data to increase the speed of monitors from other stations. MONITOR.Q0*
Latch data backup file
Stores the backup data for the latch data backup function to
the standard ROM.
LCHDAT00.QBK
Data logging setting file Setting the data logging
LOGCOM.QLG
LOG01.QLG to
LOG10.QLG
Menu definition file Menu defining files MENUDEF.QDF
Item Description File name
Parameter Parameter for operating a programmable controller
INFO.FPG
Device comment Device comment to be stored in a programmable controller
Sequence program Program that the CPU operates
Special program
*1
Positioning setting/Initial value parameter
File register Data stored in file registers
Extension file register
*2
Data stored in extension file registers
Built-in CC-Link/LT
setting
*3
CC-Link/LT parameter
Special parameter
*1
Special adapter/special block parameter saved in the main unit