26
A APPENDIX
A.1
Instructions for Compliance with the EU Directives
The EU Directives are issued to standardize different national regulations of the EU Member States and to facilitate free movement
of the equipment, whose safety is ensured, in the EU territory.
Since 1996, compliance with the EMC Directive that is one of the EU Directives has been legally required. Since 1997, compliance
with the Low Voltage Directive, another EU Directive, has been also legally required. When a manufacturer confirms its equipment
to be compliant with the EMC Directive and the Low Voltage Directive, the manufacturer must declare the conformity and affix
the CE marking.
앫
The authorized representative in the EU
Name: Mitsubishi Electric Europe B.V.
Address: Gothaer Strasse 8, 40880 Ratingen, Germany
A.1.1 EMC Directive
We declare that this inverter, when equipped with the EMC Directive compliant EMC filter, conforms with the EMC Directive and
affix the CE marking on the inverter.
앫
EMC Directive: 2004/108/EC
앫
Standard(s): EN61800-3:2004 (Second environment/PDS Category "C3")
NOTE
We declare that this inverter, when equipped with the dedicated EMC filter, conforms with the EMC Directive in industrial
environments and affix the CE marking on the inverter. When using the inverter in a residential area, take appropriate measures
and ensure the conformity of the inverter used in the residential area.
NOTES
앫
First environment
Environment including residential buildings. Includes building directly connected without a transformer to the low voltage
power supply network which supplies power to residential buildings.
앫
Second environment
Environment including all buildings except buildings directly connected without a transformer to the lower voltage power
supply network which supplies power to residential buildings.
NOTES
앫
Set the EMC Directive compliant EMC filter to the inverter. Insert line noise filters and ferrite cores to the power and control
cables as required.
앫
Connect the inverter to an earthed power supply.
앫
Install a motor, the EMC Directive compliant EMC filter, and a control cable according to the instructions written in the EMC
Installation Guidelines (BCN-A21041-204). (Please contact your sales representative for the EMC Installation Guidelines.)
앫
The cable length between the inverter and the motor is 5 m maximum.
앫
Confirm that the final integrated system with the inverter conforms with the EMC Directive.
Содержание FR-D720S-008SC
Страница 37: ...31 APPENDIX ...
