14
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
TIMER
ENTER/
FF
CLEAR/
REW
M-DET
PRE ALARM
LOCK
EMERGENCY
SPLIT/
SEQUENCE
ZOOM / 0
ACCESS
REC/STOP
DIGITAL RECORDER DX-TL910
POWER
5
6
7
8
9
1
2
3
4
OUTPUT
A/B
12
16
15
14
13
8
9
7
6
5
1
2
3
4
COM
11
OUTPUT B
10
1. POWER button
Press this button (with the MAIN switch on the rear
of this unit is set to ON), and unit will Power up (but-
ton light flashes). When the button is pressed again,
the unit will be in stand-by and the light will turn off.
When the unit is in operational transition such as
booting, the button will flash and other operations
are not accepted.
2. ACCESS indicator
Illuminates during access to hard disk drive or Com-
pact Flash Card.
3. Camera number buttons (1 to 9)
Press the button to display the image on the monitor
from the camera connected to it’s input.
4. TIMER button
When this button is pressed, the unit is set to timer
recording/stand-by and the TIMER button lights.
When pressing this button for more than 1 second,
timer recording/stand-by is cancelled and the TIMER
button turns off.
5. REC/STOP button
When pressing this button, recording starts and the
button lights. When pressing the button for more than
1 second, the recording stops and the light turns off.
When pressing this button for more than 1 second
during alarm recording, recording stops. During timer
recording, recording will not stop even if the button
is pressed.
6. SHUTTLE ring
Used to set various menus and search functions,
adjusting the playback speed, and rewinding or for-
warding the recording images.
7. JOG dial
Used to set various menus and search functions,
forwarding or rewinding the image during playback
(field-by-field).
8. SPLIT/SEQUENCE button
Press the button to display SPLIT9, SPLIT4 screen
or SEQUENCE screen setting on multiplexer
functions.
9. ZOOM button
Pressing this button twice, three and four times during
single screen display, magnifies the image by 100%,
200% and 400%. The magnification center point (X) is
displayed when the ZOOM buttons is first pressed.
Press the camera number buttons (1, 2, 3, 4) to move
the magnification location. When the ZOOM button is
kept pressed for one second or longer, the operation
of the camera number buttons and the SPLIT/SE-
QUENCE button switches support operation from
OUTPUT A (screen of the monitor connected to the
OUTPUT A connector to operations and VIDEO OUT
for OUTPUT B (screen of the monitor connected to
the OUTPUT B connector).
To display image of the monitor connected to OUT-
PUT B, set to “ON” in the setting of the “OUTPUT B
ON/OFF” of the <MPX DISPLAY SETTINGS> screen.
see page 41.
10. OUTPUT B indicator
This is not lit when the operation of the camera
number buttons and the SPLIT/SEQUENCE button
is set to OUTPUT A, and it lights with switching to
OUTPUT B.
11. COM (COMMUNICATION) indicator
Illuminates when establishing the communication with
personal computer.
12. PRE ALARM indicator
Illuminates during pre-alarm recording mode.
13. M-DET indicator
Illuminates when the motion detection function is on.
Major operations and their functions
■
Front View
Содержание DX-TL910U
Страница 95: ......
Страница 96: ...872C360A3 PRINTED IN MALAYSIA ...
