Mitsubishi Electric DX-TL910U, Инструкция по установке и эксплуатации

Страница: 39 / 96

39
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
<MPX DISPLAY SETTINGS>
The multiplexer function of this unit allows the connected
camera video to be displayed using SPLIT4 screen and
SPLIT9 screens. It is also possible to set the order of the
camera number displayed. Basic operations of the multi-
plexer can also be found on
see page 23.
■
Multiplexer function related button
operations/operation table
♦
Camera number button operations
When pressing a camera number button, the video of the cam-
era connected to that camera number terminal is displayed
using a single screen. Even during split/sequential screen dis-
play, video from any camera can be displayed using a single
screen by pressing the respective camera number button.
♦
SPLIT/SEQUENCE button operations
By pressing the SPLIT/SEQUENCE button, the display
modes shown below set in each split screen setting of the
multiplexer setting can be displayed in order.
Available modes
“SPLIT9”, “SPLIT4(a)”, “SPLIT4(b)”, “SPLIT4(c)”,
“SPLIT4 sequential”, “Single screen sequential”.
During playback, the underlined displayed modes
and single screen can be selected.
The split screen setting can be set using “SPLIT4
SCREEN SETTING” and “SPLIT9 SCREEN SET-
TING” in the <OUTPUT A> screen and <OUTPUT
B> screen respectively.
The update speed of camera video becomes
slower as the quantity of camera increases. Also,
when performing live communication by LAN, the
update speed may decrease.
To return the screen to single screen display
Pressing a camera number button (1 ~ 9) cancels the split/
sequential display and returns to the single screen display
of the pressed camera number button. Pressing the SPLIT/
SEQUENCE button again returns the screen to the split/
sequential display previous to cancelling.
When a menu screen is displayed, the single
screen display will not appear even when pressing a
camera number button (1 ~ 9). In this case, clear the
menu screen and then press a camera number but-
ton (1 ~ 9).
♦
ZOOM button operations
By pressing the ZOOM button in single screen display, the
displayed video can be viewed at 100%, 200% or 400%
magnification.
If the OUTPUT B indicator light is turned off in
the screen of OUTPUT A, the ZOOM button will func-
tion. The ZOOM button dose not function when the
OUTPUT B indicator illuminates by pressing the
OUTPUT B button.
The magnification display function can only be
set when in the single screen mode. The screen can
be moved vertically and horizontally with the magni-
fication centre point (X) as the axis by pressing the
MOVE buttons.
1. Press the ZOOM button during single screen display.
• “X1” appears on the top left the single screen display and
the magnification centre point (X) appears at the centre of
the screen.
X1
X
2. To shift the screen vertically or horizontally, press the , ,
and buttons.
The position of the magnification center point is
stored even when the display screen is switched or
the power is turned off. This is convenient when the
point to magnify is known in advance.
3. Press the ZOOM button.
• Pressing the button each time switches the magnification
in order of X2(200%), X4(400%), normal and X1(100%).
X2
X4
The magnification function can also be used dur-
ing playback of recorded contents.
INFORMATION
A black screen may appear when pausing recorded
video of multiple cameras in the single screen dis-
play mode and magnifying. In this case, display the
magnified screen by turning the JOG dial and for-
warding a frame.
INFORMATION
The magnification display function of this unit uses
digital magnification and screen details may appear
pixelized when magnifying.