Mitsubishi Electric DLP XD1000U Скачать руководство пользователя страница 11

Страница: 11 / 41

EN-11

ENGLISH

Front projection, ceiling mounting

For ceiling mounting, you need the ceiling mount kit de-
signed for this projector. Ask a specialist for installation.
For details, consult your dealer.
• The warranty on this projector does not cover any

damage caused by use of any non-recommended
ceiling mount kit or installation of the ceiling mount
kit in an improper location.

• When using the projector mounted on the ceiling,

set IMAGE REVERSE in the INSTALLATION menu to
MIRROR INVERT. See page 23.

• When the projector is mounted on the ceiling, im-

ages may appear darker than those projected in
the case of tabletop mounting. This isn't a product
malfunction.

• Ask your installation specialist to provide a breaker.

When you do not use the projector, be sure to shut
down the main power by the breaker.

• Do not install the projector where the exhaust vents

are exposed to air emitted by an air conditioning.

Such installation may cause a breakdown.

• Do not install the projector near a ﬁ re alarm because

it emits hot air from its exhaust vents.

Rear projection

Ask a specialist for installation. For details, consult
your dealer.

• For rear projection, set IMAGE REVERSE in the IN-

STALLATION menu to MIRROR. See page 23.

Caution:

• Placing the projector directly on a carpet impairs

ventilation by the fans, causing damage or failure.
Put a hard board under the projector to facilitate
ventilation.

• Place the projector at least 50 cm (or 20 inches)

away from the wall to prevent the air inlet grille and
the air outlet grilles that emit hot air from being
blocked.

• Do not use the projector in the following locations

and manners, which may cause ﬁ re or electric
shock.
• In a dusty or humid place.
• In a sideways or upside-down position.
• Near

heater.

• In an oily, smoky, or damp place such as a kitchen.
• In

direct

sunlight.

• Where the temperature rises high, such as in a

closed car.

• Where the temperature is lower than +41ºF (or

+5ºC) or higher than +104ºF (or +40ºC ).

Important:

• We don’t recommend using the projector at an alti-

tude of 1500 meters or higher. Use at an altitude of
1500 meters or higher may affect the projector’s life.

Содержание DLP XD1000U










































Результаты поиска

Содержание DLP XD1000U

Отзывы:

Похожие инструкции для DLP XD1000U

Бренды по названию

Популярные бренды

Mitsubishi Electric DLP XD1000U, Руководство пользователя

Результаты поиска

Содержание DLP XD1000U

Отзывы:

Похожие инструкции для DLP XD1000U

Бренды по названию

Популярные бренды