56
57
1. Touch the
4
Touch Panel Calibration
button on the [Control Panel] screen.
Touch the
OK
button on the confirmation screen.
2. Touch the white squares (
4
) in the order they appear, starting from the top left corner.
3. After all nine squares are touched, the screen will return to the [Control Panel] screen.
4
Calibrating the touch panel
Main Menu > Control Panel > Touch Panel Calibration
・
If each square is not touched within one minute after the last square is touched, calibration will be
cancelled and the screen will return to the [Control Panel] screen.
・
To calibrate the screen properly, use a pointy, but not sharp, object to touch the squares.
*
Sharp objects may scratch the touch panel.
4
Usage - Main Menu Settings
System Management
Main Menu > System Management
1
Checking or resetting the Error or Filter Sign
1.
Touch the
1
[Malfunction] tab to check the number of errors, the names of the group in which the
errors occurred, the addresses of the error-source units, and the error codes.
Main Menu > System Management > Status List
To check the error
1
2
Touch the
1
Status List
button on the [System management] screen.
To reset the error
1. Touch the
1
[Malfunction] tab.
2. Touch the
2
All Reset
button.
3. Touch the
OK
button on the pop-up window.
・
Those groups whose errors have been reset will have an icon indicating that they are stopped.
Number of errors
Displays the number of errors.
1
2
Error source address
Displays the M-NET address
of the units whose Error/Filter
Signs are turned on.
Error code
Displays the code for the error
that were detected.
Group names
Displays the name of the group
that includes the unit whose
Error/Filter Signs are turned on.
・
If an error occurs, note the error code and consult your dealer or a maintenance provider.
Control Panel (cont'd)
