Mitsubishi Electric AT-50A, Инструкция

Страница: 11 / 33

20 21
Temperature setting
(useable only while the unit is in operation)
Touch to adjust the temperature setting.
(* When fan mode is selected, the temperature setting cannot be made.)
The temperature can be set within the following range.
Cool/Dry : 19
°C - 30°C / 67°F - 87°F
Heat : 17
°C - 28°C / 63°F - 83°F
Auto : 19
°C - 28°C / 67°F - 83°F
*Available set temperature range varies depending on the mode or model.
4
Interlocked ventilation units (LOSSNAY)/
Fan speed/Air direction/Louver settings
A : Interlocked ventilation units (LOSSNAY)
* When interlocked ventilation units are not connected, [A] does not appear.
B
:
Fan speed (useable only while the unit is in operation)
* [B] does not appear when the model does not have this function.
* Available fan speed varies depending on the model.
C :
Air direction
(useable only while the unit is in operation)
* [C] does not appear when the model does not have this function.
* Available air direction varies depending on the model.
D :
Louver
(useable only while the unit is in operation)
* [D] does not appear when the model does not have this function.
After setting A through D , touch the
OK button.
A C
B D
Stop Low High
Setting 1 Setting 2 Setting 3 Setting 4 Setting 5 Swing Auto
Quiet Low Medium High Auto
ON OFF
Touch
4
to show the Interlocked ventilation
units (LOSSNAY)/Fan speed/Air direction/
Louver settings screen.
Basic Operations
Checking the status of the collective operation functions
1
On the GRID or the LIST screen, touch the button that brings up the Collective Operation panel.
2 Check the color of the indicator on the collective operation button.
(Yellow) : The function is enabled.
(Gray) : The function is disabled.
Checking the Function button settings
1
On the GRID or the LIST screen, touch the button that brings up the Collective Operation Panel.
2 Check what it says on the indicator on the collective operation buttons.
: The function is assigned to the F1 button.
: The function is assigned to the F2 button.
: The function is not assigned to the F1 or F2 button.