manualshive.com logo in svg

Mitsubishi Electric Apricot MS Series, Руководство пользователя

Поделиться
Скачать
Mitsubishi Electric Apricot MS Series Скачать руководство пользователя страница 35

OWNER’S HANDBOOK

D i s k e t t e s   &   C D s           2 / 1

2

DISKETTES and CDs

Diskette drive

Your Apricot PC is fitted with a 1.44 Mbyte diskette
drive. This accepts either 1.44 Mbyte (HD) or 720
Kbyte (DD) diskettes.

Each diskette has a rigid plastic cover, with a metal
shutter that guards the disk surface. Never touch the
exposed surface under the shutter – you could deform
the disk or leave a fingerprint that might make the
diskette difficult to read.

Keep diskettes away from dust, moisture, magnetic
objects, and equipment that generates magnetic fields.
Also, avoid extremes of temperature and exposure to
direct sunlight. Otherwise, data recorded on the
diskette may become corrupted.

Inserting a diskette

1.  Insert the diskette with the metal shutter

foremost, and with the label side facing
upwards.

2.  Push the diskette all the way in until it ‘clicks’

into place. The drive’s 

EJECT 

button pops out

slightly. The drive flap stays open, leaving the
diskette just visible.

COMPAC

T

Содержание Apricot MS Series













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды