Mitsubishi Electric Apricot MS Series, Руководство пользователя

Страница: 19 / 108

SAFETY & REGULATORY NOTICES
I V
Power Connection
Typical AC plugs
250V
E
L N
E
N L
250V
E
N L
125V
BS1363A SHUCO NEMA 5-15P
U. K. Austria Belgium Taiwan
Finland France Thailand
Italy Germany Japan
Sweden Norway USA
Holland Canada
250V
N
L
E
250V
SRAF 1962/DB16/87 ASE 1011
Denmark Switzerland
Checking the AC power supply
When this product is delivered, it is ready for the commercial AC
power supply generally available in the country in which it is first
sold. It has been set for the correct voltage range, and is supplied
with an AC power cord and plug which comply with the relevant
safety standards. Before using the product in a country other than
that in which it was originally sold, you must check the voltage and
frequency of that country’s AC power supply, and the type of
power cord required there. Check the power rating labels on the
rear of the computer’s system unit and its monitor to ensure that
they are compatible with the AC power supply.
The computer can function within two alternative AC power
supply ranges, according to the position of the voltage selection
switch on the rear of the system unit:
Switch setting AC power supply (voltage and frequency)
115 100 - 120 volt AC, 50 - 60 Hz
230 200 - 240 volt AC, 50 - 60 Hz
The voltage setting of the monitor must always be the same as the
voltage setting of the system unit. See the
User Guide that
accompanies the monitor or consult your supplier to find out how
to change the voltage setting.
It is imperative that the computer is set to the correct voltage range
before use. If not, the machine may be irreparably damaged.