E-19
ENGLISH
Do not wipe the circuit breaker using
thinner, detergent, or a chemical dust cloth.
Do not install the circuit breaker in a
strong magnetic field.
Use transceivers 1 m or more away from
the circuit breaker.
Doing so can take off the nameplates.
Do not tape on the nameplates.
Tolerance of the mounting surface
IODWQHVVRIWKHFLUFXLWEUHDNHUPP
1 mm or less
Use the circuit breaker in a panel.
Keep off dust and dirt.
Do not block the exhaust ports.
Do not give the circuit breaker
shock or vibration.
Do not insert foreign matters from
the exhaust ports.
Cover the circuit breaker with a sheet or
others during installation.
Failure to do
so can cause
poor conduction
or overheating.
Doing so can cause the circuit breaker
to malfunction or not to work.
Do not disassemble the circuit breaker.
CAUTION
When installing the circuit breaker, observe the following precautions.
