Mitsubishi Electric AE1000-SW, Инструкция по эксплуатации

Страница: 12 / 36

E-12
3.2 BIF-CON
The unit overview is shown as below.
●(A) LEDs
Name Indication Description
POWER
ON Power is supplied from BIF-MD correctly
OFF Power is not supplied
SHT
ON 1a contact for SHT
1)
is closed (500ms)
OFF 1a contact for SHT 1) is open
CC
ON 1a contact for CC
2)
is closed (500ms)
OFF 1a contact for CC
2)
is open
MD
ON 1a contact for MD
3)
is closed (5s)
OFF 1a contact for MD 3) is open
INPUT1
ON INPUT1 signal is ON
OFF No INPUT1 signal
INPUT2
ON INPUT2 signal is ON
OFF No INPUT2 signal
INPUT3
ON INPUT3 signal is ON
OFF No INPUT3 signal
■1): SHT is a type name of AE-SW Shunt trip device which open the main contact via remote control.
For details about SHT, please see
“AE-SW INSTRUCTION MANUAL”
.
■2): CC is a type name of AE-SW Closing coil which close the main contact via remote control.
For details about CC, please see
“AE-SW INSTRUCTION MANUAL”
.
■3): MD is a type name of
AE-SW Motor charging device
which charges the closing spring for motor operating.
For details about MD, please see
“AE-SW INSTRUCTION MANUAL”
.
Fig 3.8: Front view Fig 3.9: Side view
A
B
C
D
E
F