7. COMMUNICATION THAT DO NOT REQUIRE
THE SEQUENCE PROGRAM
MELSEC-A
7-26
7.1.21 Program RUN (Start: Server)
Use "Start" service to Run the sequence program from the client.
This can only be executed when the PC CPU status is Operational or Partially Operational. (Use
Status service to check the status.)
This can only be executed when the sequence program domain allocated by the CreateProgram
Invocation is in the READY or IN-USE status. (Use GetOD to check the status.)
PI status change
PI
status
before
execution
NON-EXISTENT IDLE
RUNNING STOPPED
Status after execution
×
RUNNING
×
×
Use the GetOD service to check the PI status.
[Parameters required by the client]
•
Access Specification
Specify the Index or Name of the Program Invocation to be started up.
Access Specification
Setting value
Index PI
Index
PI Name
PI Name
[Server (AJ71PB96F/A1SJ71PB96F) answer parameters]
None