Chapter 21 TR-069 Client
132
Connection
Request Port
The default port for access to the Router from the management server is the HTTP port,
port 80. If you change it, make sure it does not conflict with another port on your network
and it is recommended to use a port number above 1024 (not a commonly used port). The
management server should use this port to connect to the Router. You may need to alter
your NAT port forwarding rules if they were already configured.
Connection
Request User
Name
Enter the connection request user name.
When the ACS makes a connection request to the Router, this user name is used to
authenticate the ACS.
Connection
Request
Password
Enter the connection request password.
When the ACS makes a connection request to the Router, this password is used to
authenticate the ACS.
Inform
Select
Enable
for the Router to send periodic inform via TR-069 on the WAN. Otherwise,
select
Disable
.
Inform
Interval
Enter the time interval (in seconds) at which the Router sends information to the auto-
configuration server.
Table 72
Maintenance > TR-069 Client (continued)
LABEL
DESCRIPTION
