26MT-SP Multi-Tool
32
Original Instructions Version June 16
Spark Plug
Poor starting or misfiring is often caused by a fouled or
defective spark plug, clean and reset the gap to 0.65 mm, or
replace the spark plug with LD L8RTF; CH
A
MPION RCJ7Y; NGK
BPMR7
A
as necessary.
Air Filter
Before using the Multi-Tool, check the air filter (a).
A clogged air filter will reduce the engine performance.
Remove the air filter cover by undoing the cover screw,
clean the filter element in warm, soapy water and
dry completely before installing. If the element is broken
or shrunk, replace with a new one.
Carburettor
The carburettor mixture setting has been set at the factory
and will not need adjusting.
Adjusting the idle speed:
If adjustment is necessary turn the T screw (b) clockwise
until the cutter head starts to move, then turn the T screw
anticlockwise until the cutter head stops.
If the idle speed cannot be adjusted to stop the cutting
head moving at idle, contact your dealer for repair
before use.
Safety Lock
The safety lock is to prevent the throttle lever from
accidentally being engaged. The throttle lever (d) can only
be pressed in if the safety lock (c) is held down. Check if the
safety lock and throttle levers return to their original position
and the engine returns to idling when you release your
hand from the handle.
Any defects contact your nearest
service agent for repairs before using the machine.
(a)
(b)
0.6 - 0.7mm
(d)
(c)
Содержание 26MT-SP
Страница 38: ...26MT SP Multi Tool 38 Original Instructions Version June 16 Parts Diagram Engine...
Страница 42: ...26MT SP Multi Tool 42 Original Instructions Version June 16 Parts Diagram Body...
Страница 46: ...26MT SP Multi Tool 46 Original Instructions Version June 16 Parts Diagram Hedgetrimmer...
Страница 49: ...26MT SP Multi Tool 49 Original Instructions Version June 16 Parts Diagram Pole Pruner...