26MT-SP Multi-Tool
31
Original Instructions Version June 16
Running In
During the first ten hours of work, avoid running the engine at maximum speed for a prolonged
period until all the components have bedded in, after the engine has been run in, it will reach its
maximum power.
Transportation
Never transport the Multi-Tool with the engine running. An engine that is running could
be accidently accelerated causing the cutter head to engage.
Make sure the safety guards are in place when transporting the Multi-Tool.
When carrying by hand, the cutting head should be pointing backwards.
Ensure the Multi-Tool is secure when transporting in a vehicle and the tank is drained of fuel.
Maintenance
IMPORTANT
After every use, check that all nuts, bolts and screws are securely fastened and tighten if
necessary.
In the event of an accident, breakdown or blockage, ensure the engine is turned off before any
work is carried out to rectify this.
Make sure the engine has stopped and is cool before performing any service to the machine.
Contact with a moving cutting head or hot muffler may result in a personal injury.
Fuel Filter
Every 15 hours of operation, using a wire hook,
take the fuel filter from the fuel tank and clean
or replace with a new fuel filter.
Содержание 26MT-SP
Страница 38: ...26MT SP Multi Tool 38 Original Instructions Version June 16 Parts Diagram Engine...
Страница 42: ...26MT SP Multi Tool 42 Original Instructions Version June 16 Parts Diagram Body...
Страница 46: ...26MT SP Multi Tool 46 Original Instructions Version June 16 Parts Diagram Hedgetrimmer...
Страница 49: ...26MT SP Multi Tool 49 Original Instructions Version June 16 Parts Diagram Pole Pruner...