Mitox 26MT-SP, Руководство оператора

Страница: 25 / 52

26MT-SP Multi-Tool
25
Original Instructions Version June 16
Adjust the Pump as follows:
• Stop the engine and make sure the stop switch is in the OFF position.
• Place the unit on its side with the oil reservoir (1) up.
• The oil flow adjusting screw must be pressed in slightly in order to turn. Failure to do so could
damage the pump and screw.
• With a screwdriver, push in on the oil flow rate adjusting screw and turn in the desired direction.
• There are 3 incremental settings: Clockwise-decrease lubrication, Counter clockwise-increase
lubrication.
• When storing the pole pruner attachment, to prevent oil from seeping through the pump, either
1) Empty the oil tank.
2) Lay the pole pruner attachment with the tank facing down.
(1.)