Mitox 26B-SP, Руководство оператора

Страница: 11 / 32

26B-SP / 28BV-SP
11
Original Instructions Version June 17
2.2.1 Petrol characteristics
Only use unleaded petrol with a fuel grade of at least 90 RON.
IMPORT
A NT Unleaded petrol tends to create deposits in the container if left for more than 2
months, A lways use fresh petrol!
2.2.2 Oil characteristics
Only use top quality synthetic oil specifically for two-stroke engines. Your Dealer can provide you
with oils which have been specifically developed for this type of engine, and which are capable
of guaranteeing a high level of protection.
2.2.3 Preparation and preservation of the fuel mixture
Petrol and the fuel mixture are highly inflammable!
– Keep the petrol and fuel mixture in certified fuel containers, in a safe
place, away from any flames or heat sources.
– Never leave the containers within the reach of children.
– Never smoke whilst preparing the mixture and avoid inhaling the petrol
fumes.
Two-Stroke Fuel
Refuel outdoors on bare ground, restart engine at least 5m away from refuelling stop. The engine
is lubricated by oil mixed into petrol. prepare a mixture of Unleaded petrol and semi-synthetic
two-stroke oil that meets the specifications of: API TC, ISO-L-EGC, JASO FC (Low Smoke) oil.
Recommended mixing ratio is 40:1
FUEL WITH NO OIL (RAW PETROL) will cause severe damage to the engine which is not
covered by manufacturer's warranty.
Use fresh, unleaded petrol (90 RON) and semi-synthetic oil specially made for high performance
two-stroke engines. Mix in a ratio of 40 parts petrol to 1 part oil. By using two-stroke oil specially
made for two-stroke engines you will reduce the formation of ash and carbon deposits on the
spark plug, piston, exhaust muffler and cylinder as well as reducing emissions of harmful exhaust
gases.
Oil for 4-cycle engine should not be used as two-stroke lubrication oil as it can cause fouling of
the spark plug, exhaust port blocking, piston ring sticking and other internal engine damage.
NOTE
Due to increased Ethanol content in petrol we recommend the use
of B3C Ethanol Shield 2-Stroke Oil, or Ethanol Shield Fuel Stabiliser
to protect your MITOX® engine against the harmful effects of
Ethanol.
Visit www.b3cfuel.co.uk for more information.