Mitox 26B-SP, Руководство оператора

Страница: 10 / 32

26B-SP / 28BV-SP
10
Original Instructions Version June 17
2. PREPARING TO WORK
2.1 CHECKING THE MACHINE
Before starting work please:
– check that all the screws on the machine are tightly fastened;
– when used as a vacuum collector, make sure the bag is fitted correctly and that the zip is closed;
– check that the air filter is clean;
– check that the hand grips are well fastened;
– prepare accessories according to the type of work (as blower or vacuum collector) and make sure
they are correctly mounted;
– fill with fuel as indicated below.
2.2 PREPARING THE FUEL MIXTURE
This machine is fitted with a two-stroke engine which requires a mixture of petrol and 2-Stroke oil.
IMPORTANT Using petrol alone will damage the engine and is cause for invalidation of the warranty.
IMPORTANT Use only quality fuels and oils to maintain high performance and guarantee the duration
of the mechanical parts over time.
1.2 USE AS A VACUUM COLLECTOR
– Remove the screw (1) and its washers (2).
– Align the housing of the bag tube (3) with the protrusion (4) of the air outlet, push the tube and
turn it 90° anticlockwise, in order to permanently fix it in place.
The machine is correctly assembled when the tube’s terminal chute is pointed downwards and to
the left of the operator.
– Fix the tube (3) to the air outlet using the screw (1) and its washers (2).
– Loosen the knob (5) and open the protection grille (6).
– Align the first vacuum tube compartment (7) with the protrusion (8) of the inlet, push the tube
and turn it 90° clockwise, in order to permanently fix it in place.
– Align the second vacuum tube compartment
(9) with the protrusion (10) of
the first tube, push the tube and
turn it 90° clockwise, in order to
permanently fix it in place.
The machine is correctly
assembled when the rounded
part of the chute is pointed
towards the ground.
– Insert the bag tube end
(3) in to the bag
(11) and close the opening
with the supplied Velcro strap
(12).
– Hang the bag over your shoulder
and adjust the height using the
strap.
The engine can not start if you
do not assemble the vacuum tube when using as a vacuum.