Mitox 26B-SP, Руководство оператора

Страница: 17 / 32

26B-SP / 28BV-SP
17
Original Instructions Version June 17
5.8.2 Restarting work
When you wish to start using the machine again:
– Replace the spark plug cap.
– Prepare the machine as indicated in chapter 2, entitled “Preparing for work”.
The following intervals apply to normal operating
conditions only. If your daily working time is longer
or operating conditions are difficult (very dusty
work area, etc.), shorten the specified intervals
accordingly.
Before starting w
orking
A
fter finishing w
ork daily
A
fter each refueling stop
W
eekly
Monthly Ev
ery 12 months
If problem If damaged If required
Complete
machine Visual inspection (condition,
wear, leaks)
* *
Clean
*
Control Handle Check operation * *
A ir filter Clean * * *
Replace * *
Filter in fuel tank Check *
Replace filter * * *
Carburrettor Check idle setting * *
Readjust idle (1) *
Spark plug Readjust electrode gap *
Replace after 100 hours of
operation
Cooling inlets Clean *
A ll accessible
screws
Check *
Retighten *
A nti-vibration
elements
Check * * *
Replace1) *
Safety labels Replace *
Muffler Clean1) *
1) MITOX recommends that this work be performed by a MITOX servicing dealer.
Use only the spare parts recommended by MITOX.