Mitel SIP-DECT Site Survey Kit, Руководство пользователя

Страница: 12 / 31

SIP-DECT Site Survey Kit User Guide
8
MEASUREMENTS
For accurate results, all measurements must be made in active call state. A connection between
the two DECT phones is established. The audio quality measurements support the site survey.
By default, the DECT phones are subscribed to both RFP SI and RFP SX (DECT base stations)
from the SIP-DECT Site Survey Kit. The DECT base stations are single cell with different PARK
codes. Handover between RFP SI and SX is not possible.
DISPLAY AND SOFTKEYS
Standard display in idle state
XQ mode
This key toggles the XQ to OFF/ON. Default is ON and XQ is controlled by the DECT base statoin.
DECT measure mode
All visible DECT base stations from subscribed networks and from alien DECT networks are
shown in a list.
Audio mode
Select between Standard Audio , Hi-Q audio , and Automatic mode.
Nr
dBm
RFPI
Stop
Start
Clear
ESC
= item number (ordered from high to low, by field strength)
= field strength
= Radio Fixed Part Identifier (DECT base station identifier)
= stops measurement, freezes screen, enables scrolling
through a longer list
= starts measurement again
= clears screen for new measurement
= quits DECT measure mode, returns to default