Mitel DBC 42 Скачать руководство пользователя страница 34

Страница: 34 / 115

6/1553-ANF 901 54 Uen S2 2016-03-08

ELEPHONE

DBC 425

2.15

LOUDSPEAKER AND HEADSET FUNCTIONS

2.15.1 HANDS-FREE

WITH LOUDSPEAKER

This function offers you the possibility to dial and monitor the progress of a call as well
as having a conversation without using the handset.

Note:

For the hands-free function to work in a good way, it is important that the tele-

phone is placed on a plane desk. All four feet must stay steadily on the desk.

2.15.1.1 Making

calls

To make a call, dial the wanted number. Press the

Clear

key to finish a call.

2.15.1.2 Receiving

calls

To receive a call, press the

Line 1

or the

Line 2

key that indicates an incoming call with

a fast flashing lamp.

2.15.1.3

Changing from Hands-free to Handset

Lift the handset to change from hands-free to the handset.

2.15.1.4

Changing from Handset to Hands-free

Press the

Speaker

key to change from the handset to hands-free.

2.15.1.5

Changing from Hands-free to Headset

Press the

Headset

key to change from hands-free to a headset.

2.15.1.6

Changing from Headset to Hands-free

Press the

Speaker

key to change from the headset to hands-free.

2.15.1.7

Clearing a Call

Press the

Clear

key to clear a call.

2.15.2 MONITOR

MODE

Note:

Not applicable.

2.15.3 LOUD-SPEAKING WITH HANDSET

This function offers the possibility to speak in the handset and at the same time let the
conversation be heard in the loudspeaker.

Note:

The Loud-speaking function is not applicable for DBC 425.

Содержание DBC 42




















































































































Результаты поиска

Содержание DBC 42

Отзывы:

Похожие инструкции для DBC 42

Бренды по названию

Популярные бренды

Mitel DBC 42, Руководство пользователя

Результаты поиска

Содержание DBC 42

Отзывы:

Похожие инструкции для DBC 42

Бренды по названию

Популярные бренды