Mitel DBC 223 Скачать руководство пользователя страница 44

Страница: 44 / 121

3/1553-ANF 901 54 Uen F5 2018-12-03

UTGOING

CALLS

4.6

NAME AND NUMBER LOG

4.6.1

ACCESS TO THE NLOG HANDLING FUNCTION

You have access to the NLOG handling by pressing the soft-keys x Missed (x refers to

the number of new missed calls stored and only appears when there are any), or Call

List soft-key. It is also possible to initiate an NLOG key for the same use and the same

way of work as for the rest of telephones. Nevertheless, this is not possible when you

are making or receiving a call, or speaking.
After pressing the soft-key to enter the functionality or the NLOG key, the indication

(LED blinking) on the NLOG function key is cleared, if there was any. It is activated

again if a new unanswered call is logged.
The access to the functionality through Missed soft-key allows the user to see the

missed logged calls list. But in case of accessing through CallList soft-key the options

offered can be described as follows:
•

Unanswered: List of unanswered calls, which are incoming calls to the ODN or

ADN of the telephone not answered from the user.

•

Incoming: List of incoming calls to the ODN or ADN of the telephone which are

answered by the user, and they have already been read from the Call List.

•

Outgoing: List of outgoing calls perform from the user from the ODN, ADN or

MDN of the telephone.

Содержание DBC 223


























































































































Результаты поиска

Содержание DBC 223

Отзывы:

Бренды по названию

Популярные бренды

Mitel DBC 223, Инструкция по применению

Результаты поиска

Содержание DBC 223

Отзывы:

Бренды по названию

Популярные бренды