manualshive.com logo in svg

Mitel Aastra 470, Системное руководство, Страница: 75 / 284

Поделиться
Скачать
Mitel Aastra 470 Скачать руководство пользователя страница 75

Expansion Stages and System Capacity

75

Aastra 470 as of R3.2

syd-0337/1.6 – R3.2 – 09.2014

stored in Aastra 400. OpenCount obtains the licences via the XML based inter-
face Open Application Interface.

–

Aastra OpenCount Basic Package

This basic licence is a prerequisite for all OpenCount additional licences. The 
licence contains the “Company” branch package, enables the connection to 
Aastra 400 and allows basic functions to be used.

–

Aastra OpenCount Healthcare Branch Package

This additional licence offers extra functions for care and retirement homes.

–

Aastra OpenCount Public Authorities Branch Package

This additional licence offers extra functions for municipalities, communities 
and ministries.

–

Aastra OpenCount Functional Upgrade to Comfort

This additional licence offers extra functions such as PIN telephony.

–

Aastra OpenCount Functional Upgrade to Premium

This additional licence offers extra functions such as intermediate statements, 
invoicing etc.

–

Aastra OpenCount Users

This additional licence enables a defined number of users to be monitored via 
OpenCount. All OpenCount users must be licensed, otherwise a warning is 
generated.

•

Advanced Messaging

Enables the SMPP protocol to be used for integrating an SMS server and 9d cord-
less phones to be logged on as system phones (Ascom Wireless Solutions prod-
ucts). User-friendly messaging systems can then be implemented. One licence is 
required per system /AIN.

•

CTI First Party via LAN

This basic licence enables the CTI basic functions via Ethernet interface (e.g. for 
using a PC dial help) for a specific number of users (see 

"General system capac-

ity", page 61

). It cannot be combined with CTI third-party licences.

•

TWP Connection

This licence is used to connect to the Telephony Web Portal (TWP). While it is vis-
ible in the licence overview and on the licence server, it cannot be activated; in-
stead it is automatically enabled whenever user-based TWP licences are availa-
ble.

Interfaces

•

ATAS Interface / ATASpro Interface

With ATAS licences external alarm and messaging sources can be connected via 
the Ethernet interface. The licences also offer additional possibilities compared 

Содержание Aastra 470





























































































































































































































































































Отзывы:

Нет отзывов