manualshive.com logo in svg

Mitel Aastra 470, Системное руководство, Страница: 161 / 284

Поделиться
Скачать
Mitel Aastra 470 Скачать руководство пользователя страница 161

Installation

161

Aastra 470 as of R3.2

syd-0337/1.6 – R3.2 – 09.2014

First-start response

The IP addressing after a first start depends on whether a static IP addressing is al-
ready stored on the EIM card from a previous configuration. A static IP addressing 
(IP address, subnet mask, gateway) entered manually is stored on the EIM card and 
remains available after a first start. This means that the communication server re-
mains accessible via Ethernet interface in the same way as before the first start.

If no IP addressing is entered on the EIM card (e.g. after initial delivery), the commu-
nication server is started with DHCP after a first start. The communication server 
tries to log on with the DHCP server and to enter its host name on the DNS server. If 
logon is successful the communication server is accessible via the host name. 

If the communication server cannot find a DHCP server within 90 seconds, it deacti-
vates the DHCP mode and is then accessible via the standard IP address (see 

Tab. 76

) with a direct connection.

Note:

DHCP is deactivated only temporarily and is reactivated after a subse-
quent restart.

Cable types

The Ethernet switch on the communications server features Auto MDI/MDIX. With 
the automatic detection straight or crossover LAN cables can be used for all con-
nection types.

Configuration

The Ethernet interfaces routed to the front panel can be configured individually in 
the 

IP addressing

 (

=9g

) view. In addition to Auto modes, manual settings are also 

possible for 

Speed

 and 

MDI type

.

Status LED

The status of the Ethernet interfaces is indicated by the green and yellow LEDs di-
rectly on the interface in question.

Fig. 71

Status LED on the Ethernet interfaces

8"/

-"/

-"/

-"/

Содержание Aastra 470





























































































































































































































































































Отзывы:

Нет отзывов