Mitel 5540 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 88

background image

NOTICE

The information contained in this document is believed to be accurate in all respects but is not warranted

by Mitel Networks™ Corporation (MITEL

®

). The information is subject to change without notice and should

not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its
affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions
of this document or new editions of it may be issued to incorporate such changes.

No part of this document can be reproduced or transmitted in any form or by any means - electronic or
mechanical - for any purpose without written permission from Mitel Networks Corporation.

Mitel Networks is a trademark of Mitel Networks Corporation.

Other product names mentioned in this document may be trademarks of their respective companies and are
hereby acknowledged.

NOTICE TO CANADIAN CUSTOMERS

This Class A digital apparatus complies with Canadian ICES-003.

NOTICE TO U.S. CUSTOMERS

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.

Changes or modifications not expressly approved by Mitel Networks™ Corporation may void the user’s right
to operate the equipment.

Mitel 5540 IP Console User Guide

May 2009

®, ™Trademark of Mitel Networks Corporation.

© Copyright 2009, Mitel Networks Corporation

All rights reserved.

«
1
2
3
4
...
»

Содержание 5540

























































































Отзывы:

Нет отзывов

Похожие инструкции для 5540

Бренд: NEC Страницы: 7

Бренд: NEC Страницы: 68

Бренд: NEC Страницы: 44

Бренд: T-Mobile Страницы: 174

Redmi Note 10 JE

Бренд: Xiaomi Страницы: 10

Бренд: meanIT Страницы: 26

Бренд: Amron Страницы: 28

Бренд: Yezz Страницы: 5

Бренд: Blu Страницы: 21

Бренд: Sony Ericsson Страницы: 113

Бренд: Azumi Страницы: 28

Бренд: fine line Страницы: 6

Бренд: Plum Страницы: 19

Бренд: Pantech Страницы: 213

Бренд: M&T S.A. Страницы: 68

Бренд: Talk To Me Technologies Страницы: 2

Бренд: Palm Страницы: 54

Бренд: Hisense Communications Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды