95
8175 N/B MAINTENANCE
8175 N/B MAINTENANCE
Disassembly
1. Remove the LCD assembly. (See section 2.2.7 Disassembly.)
2. Remove the four rubber pads and four screws on the corners of the panel. (Figure 2-18)
Figure 2-18 Remove LCD frame
Figure 2-19 Remove LCD panel
3. Insert a flat screwdriver to the lower part of the frame and gently pry the frame out.
Repeat the process until the frame is completely separated from the housing.
4. Remove the two screws on two sides and two screws on the lower part of of the LCD panel, and disconnect the
cable from the inverter board. (Figure 2-19)
Reassembly
1. Fit the LCD panel back into place and secure with four screws, and reconnect the cable to the inverter board.
2. Fit the LCD frame back into the housing and replace the four screws and four rubber pads.
3. Replace the LCD assembly. (See section 2.2.7 Reassembly.)
2.2.8 LCD Panel
